When decorating a courtyard, many people may encounter the problem of cement smudging during the process of laying floor stones, which can be very distressing. So, how to clean the floor stones? Today, the editor will explain to you a simple and easy to clean method.
Small methods for cement stains on floor stones:
A small amount of cement for cleaning
If used in small quantities, steel wire balls can be used for better results and will not damage the floor tiles.
2. You can use a shovel or discarded magnetic card to scrape off the cement, but pay attention to the angle to prevent scratches on the ground paving stones.
3. Clean with diluted hydrochloric acid or oxalic acid (tile cleaner). Wear rubber gloves to protect your hands when scrubbing. First, apply a brush to the area with cement, and after 3-5 minutes, wipe it off with a dry cloth.

How to deal with large areas of cement on the ground floor stones:
1. Apply the cleaning solution evenly to the cement area and wait for about 30 minutes. If the cement layer on the ground is thick, cement cleaning agent can be directly sprayed.
2. After the cement on the surface of the stone pavement is softened, clean the stained area with clean water, then use a damp cloth to apply the cleaning agent to the ground surface, and let it dry naturally. How to handle the large area of cement on the ground for printing.
3. Waxing: Apply the stone wax evenly to the area of the original cement print.
4. Polishing and laying stones on the ground can restore the original state.